About Stainless Steel H-Beams

H section steel is a kind of cross section area allocation optimization, strong heavy than more reasonable economic section of high profile, because of H beam's cross section the same as the English letter "H" the name. Since the different parts of h-beam with orthogonal configuration, so H-beam in all directions has bending ability strong, easy construction, cost saving and structure light weight etc, has been widely used. 

316/316L Stainless Steel

Grade 316 is the standard molybdenum-bearing austenitic grade, particularly higher resistance to pitting and crevice corrosion in chloride environments. It is readily brake or roll formed,welded, soldered and cut by both thermal and mechanical methods.The austenitic structure gives excellent toughness, even down to cryogenic temperatures.Grade 316L, the low carbon version of 316, is highly resistant to sensitisation (grain boundary carbide precipitation) and so is extensively used in heavy gauge welded components (about 5mm and over). Grade 316H, with its higher carbon content has some application at elevated temperatures, as does stabilised grade 316Ti.

316L is actually a stainless steel material, which contains a certain amount of Mo element. The performance of this steel has exceeded that of 301 steel and 304 stainless steel. It has a very wide range of applications. Even in high-temperature environment, it will not be eroded and corroded by high temperature. It can also be used in the marine environment, and will not be polluted by some outer air, resulting in corrosion.

H-Beam's Features: 

1.Wide flange, high lateral stiffness.

2.H-beam has good bending resistance, about 5%-10% better than i-bar.

3.The two surfaces of flange are parallel to each other, which makes connection, processing and installation easy.

4.Compared with welding i-steel, H beam is low cost, high precision, small residual stress, no need for expensive welding materials and weld inspection, saving about 30% of the production cost of steel structure.

5.Under the same section load, the weight of hot-rolled H beam steel structure can be reduced by 15%-20% compared with traditional steel structure.

6.Compared with concrete structure, hot-rolled H beam steel structure can increase the usable area by 6%, reduce the dead weight by 20%-30%, and reduce the internal force of structure design.

7.H-beam can be processed into T beam, honeycomb beam can be combined to form a variety of sections, greatly meet the needs of engineering design and production. 

Product Display

Packing And Shipping

Standard export packing for stainless steel sheet：

●  Surface polish

●  Bundle package

●  Wooden case,wooden pallet package

●  Container or bulk

●  Special according to customer's request